APPENDIX: Technical requirements
General band
designation
2.4 GHz
Transmitter
Specific frequency
output power
band (MHz)
(e.i.r.p)
2400 – 2483 MHz
100 mW
Standard characteristics
IEEE Std 802.11-2012 (Clause 17, commonly
known as 802.11b)
IEEE Std 802.11-2012 (Clause 19, commonly
known as 802.11g)
IEEE Std 802.11-2012 (Clause 20, commonly
known as 802.11n)
ETSI EN 300 328
Interference
mitigation
Spectrum mask
(Bandwidth)
Channel
indexing
LBT
802.11b mask (Fig. 3)
5 MHz
LBT
OFDM mask (Fig. 1)
5 MHz
LBT/DFS/TPC
OFDM mask (Fig. 2A and
2B)
5 MHz
DAA/LBT,
DAA/nonLBT, MU
Not specified
Not
specified
IEEE Std 802.11-2012 (Clause 18, commonly
known as 802.11a)
5150 – 5250 MHz
5250 – 5350 MHz
5GHz
5470 – 5725 MHz
5725 – 5825 MHz
200 mW 10
mW/MHz
200 mW
10 mW/MHz
IEEE Std 802.11-2012 (Clause 18,
Annex D and Annex E, commonly known as
802.11j)
IEEE Std 802.11-2012 (Clause 20, commonly
known as 802.11n)
1 000 mW
IEEE P802.11ac
50 mW/MHz
ETSI EN 301 893 (Only for 5150 – 5350 MHz
& 5470 - 5725 MHz)
1 000 mW
50.1 mW/MHz
LBT/DFS/TPC
OFDM mask (Fig. 1)
OFDM mask (Fig. 2A and
2B)
5 MHz
and
20 MHz
ARIB HiSWANa (Only for 5150 – 5250 MHz)
Note:
- Pursuant to ITU Resolution 229 (WRC-12), operation in the 5 150-5 250 MHz band is limited to indoor use
-
The maximum allowable channel width is 20 MHz
Regulations for the use of unlicensed spectrum
6